New Vista TG-Series Hand-Held Units
For Offhand Thread Verification And Thread Remediation
- Higher speeds! Compact!
- Air powered! No batteries!
- Accepts the new-style “compliant” toolholders!
TG-2: Adjustable Torque Model
- Torque independent of push; with no jam feature.
- Used when protection of the mouth of the hole is paramount.
- Going-in torque is set (and limited) by means of the lockable setting collar. Full motor torque in reverse prevents jamming.
- Utilizes stop collar for depth control. Pushbutton reverse.
- Same heavy duty New Vista-patented mechanism as used in our automation machines.
NEW VISTA RT HAND-HELD THREAD UNITS
— FOR OFFHAND THREAD VERIFICATION AND THREAD REMEDIATION —
- Battery-powered.
- Versatile.
- Accepts all the new-style compliant toolholders.
- This is New Vista’s fastest hand-held!
- With a convenient rocker trigger.
NEW VISTA HTU HAND-HELD THREAD UNITS
FOR OFFHAND THREAD VERIFICATION AND THREAD REMEDIATION
- Electric-powered.
- Versatile.
- Accepts all the new-style compliant toolholders.
- Super-speed thread verification or remediation without gouging or jamming.
- Portable. Can be used anywhere. Outperforms “retappers” by three times.
- Will thread-verify most holes in 2-1/2 seconds (hole-to-hole time).
- Sensitive patented high speed drive causes the spindle to stop in case of bad or short threads. Won’t jam or damage threads if it “bottoms out”.
- Does not subject the operator to high force levels.
- Compliant toolholders allow Chasing Tools (or Thread Gage Members) to follow the hole if alignment is not perfect. See videos on the New Vista website.
- Available depth-sensing device confirms blind holes accurately for thread depth.
- Toolholders available that accept taper shank, straight shank or “reversible” Thread Gage Members.
- Battery-powered verification (or remediation) of threaded holes (or external threads).
- Portable. Two-speed gear drive. Can be used anywhere.
- Will process most threads in less than 3 seconds.
- Sensitive patented clutch unit allows the thread tool to stop harmlessly in case of hopelessly obstructed threads.
- Fast-change snap-in Type FP chuck enables tool changes in 4 seconds.
- Tool Adapters will accommodate all the popular tool shanks: taper, straight, Type BH and full-threaded (reversible).
- Compliant feature prevents jamming. It will follow the existing thread, not fight it.
- Forward (driving-in) torque settings are made with an external knob. Torque in reverse is always at maximum power.
- Portable. Variable speed. Can be used anywhere.
- Achieves precise thread depths. It will automatically stop feeding (and a light will come on) when preset depth is achieved. Reverse-out is automatic.
- Will process most threads in less than 2 seconds.
- Sensitive patented high speed drive causes the thread tool to stop in case of short, obstructed or seriously deformed threads.
- Depth-sensing device checks blind holes accurately for thread depth. When using New Vista Quick-change Toolholders, no tuning-in for thread depth is required after changeover.
- Forward (driving-in) torque settings are made with an external knob. Torque in reverse is always at maximum setting.
- Works with New Vista tool docks and pantographs.
- Right– or left–hand operation.
