Manual Load Thread Gaging Systems

SC style machines can be tooled for a wide variety of parts and processes. They can be integrated to work with most PLC Systems.

The PPT is the latest addition to our product line. It is a flexible stand-alone machine that can be used without elaborate fixturing.

This SCC-MN-2 was originally tooled for an automotive transmission component with an external M16 thread. It is fixtured with a pneumatic gripper that holds the part.

It was later retooled to verify a second part with an M10 internal thread. Using a combination gage both GO and NO GO in a single pass.

Features Summary:

Thread Verification
Combination Gaging
Multiple Part Fixturing
Hand Loaded

This SCC-MN-4 is tooled for an upper shaft with an M16 external thread. It is fixtured with a pneumatic gripper that holds the part and is robot loaded and actuated.

Features Summary:

Thread Verification
Robot Loaded
PLC Integration

This SCC-MN-6 is tooled to verify five different part numbers of Automotive Engine Inserts. It is using combination gages to complete GO and NO GO checks in a single pass. Fixturing changeover takes less than a minute.

Features Summary:

Thread Verification
Combination Gaging
Multiple Part Fixturing
Hand Loaded
Quick Change Toolholders

This SCD-MX-5 machine is tooled to GO verify eleven sizes of Nuts ranging from 7/8” up to 3” threads. The adjustable fixturing and Quick-Change Toolholders allow changeover times under one minute. New part numbers are selected on the screen and torque values for each Nut size are preset.

Features Summary:

Thread Verification
Hand Loaded
Multiple Part Fixturing
Quick Change Toolholders
Automatic Sorting
Sorting Bins

This automated SCC-MN-2 is tooled for brake system components. In this fully automated machine parts are fed by a vibratory feeder, GO verified, and sorted, good and reject parts go down separate tubes. Total cycle time is 3 seconds.

Features Summary:

Thread Verification
Fully Automated
Automatic Sorting
Sorting Into Bins

This SCC-MN-4 grips onto the part at the start of the cycle. After verification the part is automatically unloaded and sorted onto good and reject conveyors.

Features Summary:

Thread Verification
Hand Loading
Grip Fixturing
Automatic Unload
Automatic Sorting
Sorting Onto Gravity Conveyors

This SCC-MN-4 verifies an M18 thread in a part where access to the thread is restricted.

Features Summary:

Thread Verification
Hand Loading
Restricted Access

This SCD-MX verifies straight and tapered pipe threads ranging in size from ¾” to 2”. The rpm, the torque level and the thread depth are all selectable off the Touchscreen. It is fixtured and tooled to verify 14 parts.

Features Summary:

Thread Verification
Hand Loading
Tapered Pipe Thread Verification
Multiple Part Fixturing

The SC and PPT machines are capable of performing thread operations on a wide variety of parts.

This PPT verifies M10 internal threads in aluminum extrusions. The fixture is designed to test two parts that are mirrored.

Features Summary:

Thread Verification
Hand Loading
Multiple Part Fixturing

This PPT chases excess plating off external M8 threads. It was provided as a bare unit so the customer could design the fixturing.

Features Summary:

Thread Chasing
Hand Loading
Customer Designed Fixturing

A New Vista SVV setup shown to the right. Part fixturing is simple; or, in many cases, not required at all.

A new Vista SVX setup. All the benefits of the SVV plus the benefit of a removable Thread Unit to check off axis threads.

This unit was designed for sample inspection of M6, M8, and M10 internal threads in crankcases both GO and NO GO. The removable HTU unit allows easy access to off axis threads.

This station counts each individual thread verification and passes or fails the part. The serial number of the part along with the verification data is saved to a database.

Features Summary:

Thread Verification
Removable Handheld Thread Unit
Tool Dock
Full Count Option

This SVX pantograph station includes an HTU handheld thread unit that can be removed from the pantograph to verify threads that are hard to access with the pantograph.

Features Summary:

Thread Verification
Removable Handheld Thread Unit
Integrated Depth Probe
Tool Dock

This is a demonstration of an SV pantograph unit verifying 8-32 and 10-32 internal threads in electrical fittings.

Features Summary:

Thread Verification
pantograph
Limited Or No Fixturing

This SV pantograph reconditions and verifies M4 studs on injector solenoids in a single pass. The palletized fixture holds 28 parts at once.

This same SVV, with its convertible overhead drive train, can handle threads up to M30 (1-1/4”) size.

Features Summary:

Thread Reconditioning
Palletized Fixture
Pantograph

This SV pantograph unit verifies five threads in a fuel injection rail. This unit includes the full count option where the control keeps track of the pass/fail status of each thread. Once all threads are checked, the pass/fail status of the whole part is displayed.

Features Summary:

Thread Verification
Full Count Option
Pantograph

This set of three SVV pantograph units is tooled to verify a wide range of parts. The quick-change tooling can be swapped in instants.

New Vista’s Type J Toolholding System will accommodate any size or depth of thread and is compatible with our tool docking station making tooling changes a breeze

The Control and Monitoring Unit shown here is part of the System. Once the operator engages the threaded feature, the control takes over; it runs the tool to depth and it automatically reverses it out. The machine makes the decision whether the thread has been successfully verified or chased; the operator cannot override it.

These flexible units are designed to replace hand gaging and are easily fixtured to process multiple parts with a quick change over time. Generally, hand-loaded they can be modified to be robot loaded or work as an automated station. New Vista has two main types of bench mounted stations the PPT and the SC.

Complete hand-guided system for thread verification or thread remediation

Features
Videos
Resources
Get a Quote

PPT	SC
The PPT is an inexpensive push-pull machine for thread resizing, thread verifying, or remediation (chasing). All electric. Available in 220 vac or 120 vac. It’s portable. Supplied standard with New Vista 62020AC composite clutch and Type FP quick-change chuck. Will follow existing thread. It won’t crossthread (with the Squaring-up Plate). Tools will not jam in the threads (reverse-out is at higher torque than run-in). Will not tear up the mouth of the thread (won’t damage the thread at entry). No programming required at all. Tool Adapters available to run any gage or remediation tool and any shank configuration: taper shank, straight shank, all-threaded and Type BH. No operator training required. High torque on demand without operator effort. Variable speed settings: from 0 to 1,400 rpm. Slow-start feature is available with the basic unit. When used for thread verifying, cycles of 1 second are often attained (the operator’s part-handling time will be in addition to this). Complete changeover in seconds. Green light illuminates when correct thread depth has been achieved (with the Thread Depth Option). Can be run freehand, without any fixturing. But for fast cycles, order the Squaring-up Plate.	The SC is a fast machine for thread resizing, thread verifying, remediation (chasing) or retapping. Fast. Manually loaded floor-to-floor cycles of 3 to 4 seconds are regularly attained. Automated machines can be twice as fast. Models available that will run a large variety of internal or external, straight, or tapered threads. Utilizes production-proven, patented New Vista mechanisms and controls. Low maintenance and long thread tool life. Sensitive high-speed drive allows spindle to stop quickly if an obstruction is encountered. Will not subject the part or the tooling to damaging force or torque levels. Will not jam or stick in undersize or short threads. Outputs are available for integrated applications. Supplied tooled and proven out for your application. The economical way to run fast cycles in either high or low volumes. Will run a variety of parts. Available with Quick-change Toolholders and Fast-change Fixtures. Auto load, auto unload and auto sort options are available. Most changeovers in less than 30 seconds. Tooling available for hand-loaded or automated applications

PPT

SC

The PPT is an inexpensive push-pull machine for thread resizing, thread verifying, or remediation (chasing).

All electric. Available in 220 vac or 120 vac. It’s portable.
Supplied standard with New Vista 62020AC composite clutch and Type FP quick-change chuck.
Will follow existing thread. It won’t crossthread (with the Squaring-up Plate).
Tools will not jam in the threads (reverse-out is at higher torque than run-in).
Will not tear up the mouth of the thread (won’t damage the thread at entry).
No programming required at all.
Tool Adapters available to run any gage or remediation tool and any shank configuration: taper shank, straight shank, all-threaded and Type BH.
No operator training required.
High torque on demand without operator effort.
Variable speed settings: from 0 to 1,400 rpm.
Slow-start feature is available with the basic unit.
When used for thread verifying, cycles of 1 second are often attained (the operator’s part-handling time will be in addition to this).
Complete changeover in seconds.
Green light illuminates when correct thread depth has been achieved (with the Thread Depth Option).
Can be run freehand, without any fixturing. But for fast cycles, order the Squaring-up Plate.

The SC is a fast machine for thread resizing, thread verifying, remediation (chasing) or retapping.

Fast. Manually loaded floor-to-floor cycles of 3 to 4 seconds are regularly attained. Automated machines can be twice as fast.
Models available that will run a large variety of internal or external, straight, or tapered threads.
Utilizes production-proven, patented New Vista mechanisms and controls.
Low maintenance and long thread tool life.
Sensitive high-speed drive allows spindle to stop quickly if an obstruction is encountered.
Will not subject the part or the tooling to damaging force or torque levels.
Will not jam or stick in undersize or short threads.
Outputs are available for integrated applications.
Supplied tooled and proven out for your application.
The economical way to run fast cycles in either high or low volumes.
Will run a variety of parts.
Available with Quick-change Toolholders and Fast-change Fixtures.
Auto load, auto unload and auto sort options are available.
Most changeovers in less than 30 seconds.
Tooling available for hand-loaded or automated applications

For SC Machines

FRAME SIZES	THREAD SIZES: VERIFICATION	THREAD SIZES: Remediation
MN-2	M3 – M10 (#4 – 3/8”)	—
MN-4	M8 – M38 (5/16” – 1-1/2”) & Pipe threads through 1/2”	M3 – M10 (#4 – 3/8”)
MN-5	M19 – M70 (3/4” – 2-3/4”) & Pipe threads through 2”	M6 – M25 (1/4” – 1”)
MX-5	M32 – M90 (1-1/4” – 3-1/2”)	M10 – M38 (3/8” – 1-1/2”)
MX-6	M70 – M190 (2-3/4” – 7-1/2”)	_

A “–CMB” suffix is applied to the model number if the machine will be used for “Combination” thread gaging, or for pipe thread gaging.

SVV and SVX

Will work with both internal and external threads.
Verifies, re-forms or remediates threads at rates up to 1,600 holes (or male threads) per hour. That’s 2-1/4 seconds from one threaded feature to the next.
Hole-to-hole movements are manual. The counterbalanced pantograph supplied diminishes operator fatigue, and eliminates the possibility of cross threading.
The System, not the operator, determines whether the thread has been successfully verified or chased.
Utilizes the same patented New Vista mechanisms that are in use in New Vista-supplied installations all over the world.
Will run a variety of parts, both large and small. Can accommodate male or female threads of varying sizes. When equipped with one of the New Vista Quick-Change Toolholders, changing from one thread to another takes only a few seconds. Will gage or chase various thread depths without tuning in.
Can take advantage of tool docking for even more convenience.
Will not jam or stick in undersize or short threads. Will not subject the operator, the part or the tooling to high force or torque levels…even with a thread blockage.
Standard models available that will run threads from M3 through M30 (#4 thru 1-1/4”).
“Full Count Option” guarantees that no holes in a pattern are missed.
Supplied tooled and proven out for your application.