Features
- For use in mills and drills and with various New Vista thread-verification and thread- chasing drive units
- Floating adapter will find and follow threaded holes (or external threads)
- Holes or threads can be out of position up to 3.5mm from true position
- Can compensate for off-angularity up to 5°
- Specially designed to avoid cross threading by accommodating out of position threads first, and then adjusting for variances in angularity
|
Two Models to choose from, both are available in standard and metric sizing.
 |
| |
AD-619
(METRIC)
|
AD-620
(INCH)
|
AD-419
(METRIC)
|
AD-420
(INCH)
|
OUTSIDE
DIAMETER
|
Ø44.5mm |
Ø1.75” |
Ø40mm |
Ø1.59” |
OVERALL
LENGTH
|
100mm |
3.97” |
89mm |
3.50” |
INPUT
BORE/SHANK
|
Ø19mm BORE |
Ø.750” BORE |
Ø13mm SHANK |
Ø.500” SHANK |
OUTPUT
BORE
|
Ø14mm |
Ø.562” |
Ø13mm |
Ø.500” |
MAX. OFFSET
FROM CENTERLINE
|
1.85mm
(Ø3.7mm true pos.)
|
.073”
(Ø.146” true pos.)
|
1.75mm
(Ø3.5mm true pos.)
|
.069”
(Ø.138” true pos.)
|
MAX
RPM
|
2,200 |
2,200 |
3,600 |
3,600 |
DRILL OR
TAP
|
Ø16mm |
Ø5/8” |
Ø13mm |
Ø1/2” |
THREAD
CHASE
|
Ø19mm |
Ø3/4” |
Ø16mm |
Ø5/8” |
THREAD
INSPECT
|
Ø32mm |
Ø1-1/4” |
Ø22mm |
Ø7/8” |
|
| |
