Industries Served - Automotive

We know high volume. For customers like Neapco, Tinnerman Palnut, Toledo Technologies and Allison, New Vista was the best choice to design rugged, high-output machinery.
U-Joint Assembly Machine
  • Machine presents bearings and snap rings into securely-clamped universal joint yokes
  • Has detection device to check if snap ring is seated properly

Servo-Controlled Mill & Drill Machine
The production requirement on this New Vista VP is less than one shift. Even here, it was much more cost-effective to go with a single-fixtured New Vista VP than with a multi-fixtured commodity CNC, which would have cost only slightly less and would have required over 3X the labor.

  • Part: 3-1/2" aluminum transmission component.
  • Cycle: 15 seconds floor-to-floor
  • Mill front face, mill boss on back face, bore precision stepped hole, brush deburr front face
  • Cpk = 1.67
  • Employs through-the-tool high pressure coolant
  • Part fixture edge clamps are "floating type"
  • 3-point air sensing ensures that every part is always properly fixtured.