 |
| Gantry-mounted
grippers at left load part into collets on
the right. The load-in magazine is at the
upper right. |
|
This
machine works both ends of a 4-1/2" long
steel automotive brake part. The part is fixtured
stationary for the Station 2 and Station 5 operations,
but it is rotating at Station 3 to bore out the
recess.
- Servo-controlled
- Cycle: 16 seconds floor-to-floor
- Automatically loaded and unloaded
- Machines tail end (mill face, drill hole, apply 2 chamfers)
and head end (machine O.D., counterbore, face,
apply 2 chamfers)
- Employs oversize coolant system
|
